|Place of Origin:||Hebei, China (Mainland)|
|Minimum Order Quantity:||1Ton|
|Packaging Details:||Bag+Wooden Pallets|
|Delivery Time:||7 days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||10Tons per Day|
|Finish:||As Customer's Requirement||Packing:||Bag+Wooden Pallets|
spring steel washer,
spring washer din standard
Spring washer are mainly punched out from iron plates. Spring washer: after lock, use elastic pad have the effect of locking, and of course to a double nut effect is poor.
Single nut + flat mat, play mat: rely on the nut itself locking force and elastic cushion locking performance, a double nut.
Flat washer: only increase the surface area Prevent the soft substrate was installed a damaged, or is blocking hole.
Locking method still has a lot of, this is just a very old some basic locking method, but also very practical.
Trampoline's role is to prevent the screw loose caused by the vibration of the machine or heat bilges cold shrink.Role is flat mat, increase the contact area of the screw and machine 1, 2, eliminate the trampoline at the time of discharge screw damage on the surface of the machine must be a spring when using a flat mat, flat pad close to the surface of the machine, spring cushion between the plain washers and nuts.
Flat mat role is long screw is screw is half buckles added flat washer cap can take full 2 is the place on the screw hole is too large added a flat washer not leak down
Trampoline is mainly used for locking, used in vibration is not big, if the vibration is big, generally want to use the double nut locking or other locking method, flat washer is mainly used to increase the contact area, like on the bearing seat because the drive is long and narrow hole, must be the home of the flat washer.
Flat mat increase the contact area, spring cushion is used for locking, when it is used in trampoline should pay attention to the direction of the opening, or the locking effect is not big.
DIN127 DIN128 Carbon Steel Zinc Plated M2-M100 Spring Washer Flat Washer
Flat and spring washer is generally used to distribute the load of a threaded fastener, such as a bolt, scres or nut. Other uses are as a spacer, spring (wave washer), wear pad, preload indicating device, locking device, and to reduce vibration , rubber washer. Washers usually have an outer diameter (OD) about twice larger than their inner diameter (ID).
The sizes of spring washer we have are from M3 to M52.
1. Good after-sales service. Any small problem happening will be solved at the most prompt time
2. Many years of export experience;
3. Specifications list is available upon your request;
4. Welcome to send enquiry, we will reply soon;
5. Prompt shipment with professional documents;
6. Custom packing, with photo before shipment;
7. High quality and competitive price.
HANDAN QIANBANG FASTENERS MANUFACTURING CO.,LTD is located in China’s largest fasteners production base---Yongnian fasteners centre.
Our factory was founded in 1991.We have several sets of advanced equipments, adopt advanced modern management and use hig quality steel to produce high quality products. The products sold throughout the domestic and exported to Southeast Asia and Europe and other countries and regions. Our products win good reputation with domestic and foreign customers.
Our factory mainly produces: all kinds of flat washers, spring washers, expansion screws, hex nuts, flange nuts, hex bolts, flange bolts, sleeve anchor, fundation bolts, and thread robs with DIN, BSW, ANIS,.And we also provide the OEM, Meanwhile, we are manufacturing factory, so we can give you the best quality and the good price.
Packing & Delivery
Packing Details : Bags ,pallets or according to customer's requirement.
Delivery Details : 7 days after order
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Contact Person: Gina